Three-Part Barrier System The Horizon Insulated System provides three levels of protection: Waterproof membrane creates a seamless barrier to moisture from footing to sill plate. Rigid fiberglass Insulation board boosts the home's energy efficiency and reduces interior foundation wall condensation. Durable, textured topcoat repels moisture and gives exposed foundation an attractive, finished look.

Warranted Protection From Footing to Sill The Horizon Insulated System starts with North America's #1 foundation waterproofing brand, TUFF-N-DRI® membrane, on the exposed foundation wall, providing an uninterrupted moisture barrier that protects from the footing to the sill plate. This full-wall waterproofing membrane will reduce the number of leak call-backs, since a majority of foundation wall leaks on waterproofed walls occur at the grade line when below-grade waterproofing walls occur at the grade line when below-grade waterproofing usually stops. Horizon ThermoPanel™ is a sturdy, design-engineered insulation panel that is placed on top of the waterproofing membrane and mechanically fastened to the exposed wall. This mesh-reinforced fiberglass panel delivers stability, rigidity and superb detailing performance. The Horizon ThermoPanel is available in either R5 or R10 insulation value, and helps prevent condensation on the interior above-grade foundation wall. Since it insulates the wall from the OUTSIDE, the need for interior foundation insulation is eliminated. The system is completed with Horizon Coat, a tough, spray-applied exterior finish. Horizon Coat not only adds an attractive, durable, UV-resistant finish to the exposed foundation wall, but also provides an extra layer of waterproofing protection to the home. Horizon Coat comes in a neutral grey color, and is available in either a matte or coarse finish.

Horizon Coarse Coat (shown in photo above) provides a durable, textured topcoat that repels moisture and gives exposed foundation an attractive, finished look.

Horizon Membrane Properties

Type Elastomeric, emulsion based coating   Color Grey     Application Temperature 32°F (0°C) to 100°F (38°C)   Cure Time 24 Hours     Film Thickness 40 mils dry @ 20ft2/gal.     Elongation 150% Method ASTM D2370 Mandrel Bend 1/2" @ -15° (26°C) Method ASTM C711 Shore "A" Hardness 70 Method ASTM D2270 Water Vapor Permeance 6 perms Method ASTM E96 Matte Finish Coarse Finish Solids 63 +- 2 [percent by weight] 72 +- 2 [percent by weight] Density 11 lb/gal. 12.5 lb/gal. Application Airless Spray/Brush Method Air Atomized Texture Spray/Brush

Horizon Board Properties

TypeRigid fiberglass with integral glass surfacing mest.   Board Thickness 1-2/16" 2-3/6" Thermal Resistance   Resistance R5 R10 Foundation Board Compression Properties     Compression Pressure lbs./sq.ft. (10% compression) 800 800 Drainage (Gallon/hour/lineal foot) >90 >180