Performance Specifications

Installed by experts.

DrainStar is designed to be used in combination with TUFF-N-DRI® products. Your Barrier Solutions Contractor has the experience and extensive training to ensure the highest quality application of DrainStar and the waterproofing product you prefer (see diagrams, far right).

Flow characteristics.

DrainStar provides a flow quotient of 170 gallons/min./ft. (when tested to ASTM D4716-95 with hydraulic gradient of 1 with confining stress of 3600 PSF).

DrainStar offers a full array of fittings that make the system fast, easy and versatile to install. End and side outlets are available for your choice of drainage exits. And corners guard fittings are available to help DrainStar follow 90° angles while maintaining water flow.

Backfill soil (1) typically contains many different particle sizes. When the soil comes into contact with the DrainStar filter fabric (2), the larger particles bridge the smaller particles to form a "filter cake" (3). The filter cake helps block the encroachment of finer soil particles to prevent clogging or blinding of the filter fabric for long-term filtration performance.

Replaces gravel and drain tile.

DrainStar is an effective replacement for traditional foundation drain tile and gravel systems. In fact, no gravel is required when DrainStar is installed on the footing next to a minimum 24-inch height of quality foundation drainage board.

With DrainStar, there's no more scheduling of gravel deliveries. No carrying gravel in buckets or wheelbarrows. No gravel scattered around the jobsite to become a nuisance. So you save time and aggravation.

Drain tile
and gravel
system

Vertical DrainStar installation
(with TUFF-N-DRI system)

Drain tile and gravel systems (top) have a water collection area of a minimum 24 square inches per foot in length. By combining DrainStar (A) with at least 24 inches of a quality foundation drainage board such as WARM-N-DRI®(B), you'll match the water collection area of a drain tile and gravel system. WARM-N-DRI board has over a 30-year track record of below-ground drainage performance Depending on your application needs, DrainStar may be installed in a vertical (middle) or L-shaped (bottom) design.

DrainStar® Stripdrain Specifications

Typical Property Test Method  
 
Drain Properties    
Compressive Strength, lbs/sq ft 6000-9500 ASTM D1621 or D695
Shear Strength, lbs/sq ft 6000-9500 ASTM D1621 (Mod.)
Peel Strength, lbs/sq ft 38 ASTM D1876
Fungus Resistance (core) No Growth ASTM G21
In-Plane flow, gpm/ft of width
  Hydraulic gradient = 0.1, loading = 10 psi
21 ASTM D4716
Unobstructed inflow area
  Pavement side
85%  
 
Fabric Properties 4.0 oz    
Material Polypropylene    
Weight, oz/yd2 4.0   ASTM D3776
Grab Tensile Strength, lbs 115   ASTM D4632
Puncture Strength, psi 70   ASTM D3787
Trapeziodal Tear, lbs 50   ASTM D4533
Mullen Burst Strength, psi 240   ASTM D3786
Elongation, % 50   ASTM D4632
EOS (AOS) 80   ASTM D4751
Permeability, cm/sec 0.20   ASTM D4491
Flow Rate, gpm/ft2 170   ASTM D4491
UV Stability, 500 hours 85% Retained   ASTM D4355
Fungus Resistance No Growth    
 
Dimensional Data      
Thickness 1 inch    
Standard Widths min. 12 inches    
Roll Weight min. 200 lbs